VS-127 Multi-Functional Camera Detector
by SZ Vodasafe
Description:
The VS-127 Multi-Functional Camera Detector by SZ Vodasafe is a state-of-the-art device designed to safeguard your privacy by detecting hidden wireless cameras and WiFi IP cameras. Engineered with advanced technology, this detector offers comprehensive coverage across multiple frequency bands, ensuring you can identify potential surveillance devices in various environments. Whether you're in a hotel room, office, or any space where privacy is a concern, the VS-127 provides reliable protection.
Features:
Wide Frequency Coverage
Wireless Video Cameras:
900 - 1300 MHz
2340 - 2550 MHz
5645 - 5945 MHz
WiFi IP Cameras:
2410 - 2480 MHz (2.4G WiFi)
5180 - 5320 MHz (5G WiFi)
5745 - 5825 MHz (5G WiFi)
Dual Detection Modes
Wireless Video Camera Scanning
Cyclic scanning of 1.2G, 2.4G, and 5.8G bands (approx. 20 seconds per cycle)
Displays video signals on a 2.5-inch LCD screen
Shows the frequency of the detected signal in the lower-left corner of the screen
Effective detection distance of up to 200 feet (depending on the transmitter's output power)
WiFi IP Camera Detection
Identifies activity of 2.4G and 5G WiFi IP cameras
Detects signals up to 12 feet away
Three alert modes: beep, vibration, or beep + vibration (default)
LED indicators and audible alerts for clear signal identification
Plug-in Lens Finder
Equipped with 8 ultra-bright LED lights for visual detection of camera lenses
Features a viewfinder for precise identification of reflective surfaces
Capable of uncovering hidden cameras, even when they are powered off
Simple plug-and-play installation into the detector
Audio Demodulation
Built-in audio demodulation technology for 6.5 MHz and 6.0 MHz frequencies
Allows you to listen to audio signals from wireless cameras with microphones
Connect headphones via the 3.5mm jack for private listening
Advanced Signal Handling
Auto-scan, lock, and manual fine-tuning capabilities
Signal lock function to freeze and analyze specific frequencies
Fine-tune controls for optimizing video and audio clarity
AV output for recording detected signals to a DVR
Power Options
Compatible with 4 x AAA/UM-4 dry batteries or rechargeable batteries
USB port for connecting a power bank (5V 1.5A or higher)
Charging indicators: red for fast charging, green for slow charging
Battery life: Up to 15 hours with a 7000mA power bank
Technical Specifications
|
Dimensions |
L 11.6 x W 7 x T 3.3 cm (with antenna: L 19 cm) |
|
Weight |
Approximately 215g (excluding batteries) |
|
Power Source |
- Switching power adaptor |
|
Battery Charging Time |
6 hours (off) / 12 hours (on) |
|
Video Protocol |
Auto-switching for NTSC, PAL, SECAM |
|
Scan Modes |
- Wireless video: 1.2G/2.4G/5.8G cyclic |
|
Sensitivity Adjustment |
9-level tuner (9 = highest, 1 = lowest) for WiFi mode |
|
Warning Methods |
Beep, vibration, headphone silent detection |
|
Display |
2.5-inch LCD with LED status indicators |
How to Use
Installing Batteries
Open the battery compartment on the back of the device
Insert 4 x AAA/UM-4 batteries following the +/- polarity indicators
Replace the battery cover
Powering On
Slide the power switch on the right side to "1" to turn on the device
The detector will default to wireless video camera scan mode
Wireless Video Camera Scanning
The device will automatically cycle through 1.2G, 2.4G, and 5.8G bands
Upper blue LEDs indicate the current band; lower green LEDs show scanning status
When a signal is detected, the video will appear on the LCD screen with the frequency displayed
Locking a Signal
Press and hold the (+) button on the left side for 1.5 seconds to lock the signal
Use the (+) and (-) buttons to fine-tune the video clarity
Listening to Audio
Plug headphones into the jack on the right side
Press and hold the (-) button to switch between 6.5 MHz (L) and 6.0 MHz (R) audio frequencies
WiFi IP Camera Detection
Press the (-) button to switch to WiFi mode
The device will scan 2.4G and 5G WiFi channels
Adjust sensitivity using the dial on the right (9 is highest)
Move towards the source by decreasing sensitivity step-by-step
Using the Lens Finder
Plug the lens finder into the bottom jacks (ensure correct orientation)
Press the red power switch to activate the LED lights
Scan areas for strong reflections, which may indicate a camera lens
Use the viewfinder for closer inspection
Package Contents
1 x VS-127 Wireless Camera Detector
2 x Antennas
1 x AV Output Cable
1 x Power Adapter
1 x Headphone
1 x Plug-in Lens Finder
1 x User Manual
Safety and Caution
Do not disassemble or modify the device, as this will void the warranty.
Use only the provided power adapter to avoid damage.
Keep the device away from water, moisture, and high temperatures.
Do not touch the antennas to metal surfaces or signal sources to prevent electrostatic damage.
Remove batteries if the device will not be used for an extended period to avoid leakage.
Do not overcharge or over-discharge the batteries, as this is not covered by the warranty.
Warranty Information
SZ Vodasafe warrants this product to be free from defects in materials and workmanship for a period of 12 months from the date of purchase. This warranty does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.
Applications
Hotel and hospitality industry
Office and commercial spaces
Residential properties
Conference rooms and meeting spaces
Travel and personal privacy protection
Event venues and public spaces
The VS-127 Multi-Functional Camera Detector combines cutting-edge technology with user-friendly design to provide you with peace of mind in any environment. Whether you're concerned about hidden cameras in your home or workplace, this device offers the reliability and performance you need to protect your privacy.
